全新進口德國費斯托信號轉換器，F(xiàn)ESTO信號轉換器**參數
上海乾拓貿易有限公司
企業QQ：
電話；021-69001039
手機；17321017802（微信）
郵箱；17321017802@163.com
地址：上海市嘉定區江橋嘉涌路99弄6號713室
The signal converter detects analogue current or voltage signals from sensors (transmitters).
 Connection to the higher-level system is provided by 1 or 2 switching outputs or
 alternatively by an IO-Link® interface. The signal converter has a display for visualising the signals and parameters,
 and can thus be used as a remote display for transmitters.
Input signal –2V –2A
Measured variable Voltage Current Signal range [V] 0 … 10 – [mA] – 0 … 20 Sampling interval [ms] 1
Many integrated functions  Min./max. monitoring  PNP/NPN, switchable  Eco mode 
 Tamper protection with security code  Filter can be adjusted to smooth the signals 
 The switching points can be easily set via teach-in  Parameters can be easily copied to other devices
Values can be displayed in many units  bar  kPa  MPa  psi  mmHg 
 inchHg  inchH2O  kgf/cm2  l/min  l/h  scfm  scfh  GPM  mm  inch  V  MA  %
Flexible use  Transmitter signal area scalable (e.g.: 1 … 5 V)
 Measured value indicator can be individually configured  Lots of integrated switching functions
Connections for up to 2 sensor transmitters
Product description Area of application
 Fast and decentralised signal processing to reduce the load on the control system 
Remote visualisation of process values, the display is detached  Quantity detection,
e.g. pressure transmitters, vacuum transmitters, flow transmitters  Object detection, e.g.
 inductive sensors with analogue output, distance sensors  Position detection, e.g.
 position sensors for pneumatic cylinders  Auto difference monitoring, e.g. leak test
The signal converter can be used with the following Festo products, for example.
Output, general
Accuracy FS [%] 0.5 Repetition accuracy [%] 0.2
Switching output
Switching output 2 x PNP or 2 x NPN, switchable Switching function
Freely programmable Switching element function N/C or N/O contact, switchable Max. output current [mA] 100 Short circuit protection Yes
The switching outputs can be configured to monitor a threshold value, signal range or signal change.
The outputs can be set as PNP or NPN and normally open (NO) or normally closed (NC).
Process values can be read out and parameters changed and transmitted to additional devices via the IO-Link® interface.
Converts analogue signals into digital switching signals 
Conversion of analogue signals in IO-Link®  Reduction in analogue signals to the control systems 
Easy operation  Blue display with high-contrast white text and red switchover
Intuitive menu navigation, as for pressure sensors SPAU and SPAN
Communication interface
Pressure transmitters SPTE, SDE5-NF-V, SPTW  Vacuum generator OVEL with SPTE 
Flow transmitters SFET-F, SFET-R  Position sensors SDAT, SMAT-8E, SMAT-8M 
Analogue sensor box SRAP  Inductive sensors with analogue output SIEA
Connection in 2 steps 1 Connecting cable NEBS-L1 2 Plug connector NECU for analogue inputs
General technical data
Certification RCM compliance mark CE marking (see declaration of conformity)
 In accordance with EU EMC Directive Ambient temperature [°C] 0 … +50 Note on materials RoHS compliant

全新進口德國費斯托信號轉換器，F(xiàn)ESTO信號轉換器**參數